Maximum permissible axis velocity in security zone (P-AXIS-00030)

P-AXIS-00030	Maximum permissible axis velocity in security zone
Description	The parameter defines the maximum permissible axis velocity inside the security zones 1 and 2 if the control signal is active. Activation for security zone 1 is executed by the “Reduced velocity in zone 1“ control unit. This security zone is limited by the position limits given by P-AXIS-00093 and P-AXIS-00085. Activation for security zone 2 is executed by the “Reduced velocity in zone 2“ control unit. This security zone is limited by the position limits given by P-AXIS-00105 and P-AXIS-00097.
Parameter	getriebe[i].vb_max_red_zone
Data type	UNS32
Data range	0 ≤ P.AXIS-00030 ≤ P-AXIS-00212
Axis types	T, R
Dimension	T: µm/s	R: 0.001°/s
Default value	0
drive types.	----
Remarks	When P-AXIS-00503 is 0 (default), this parameter is always effective for both zones.

Parameters of permissible axis velocities inside the security zone 1

Parameters of permissible axis velocities inside the second security zone

Remark on active acceleration during the deceleration phase:

The effective acceleration during deceleration depends on the following factors:

the channel parameter P-CHAN-00097
the time of activation of a particular security zone signal in the PLC
(“Reduced velocity in zone 1“/ “ control unitReduced velocity in zone 2“) control unit
the current axis position at this time in relation to the zone.

If the axis is outside the zone at the time of signal activation, the axis decelerates at the acceleration value of P-AXIS-00004 . If the axis is inside the zone, the axis decelerates at the acceleration value of P-AXIS-00024 .