Valid deceleration ramp at FEEDHOLD (P-CHAN-00097)
P-CHAN-00097 | Valid deceleration ramp at FEEDHOLD |
Description | This parameter defines the deceleration ramp used when FEEDHOLD is active. When P-CHAN-00097 is set, the parameterised delay is dependent on the slope used. With a linear slope, the delay is defined by P-AXIS-00024; if the slop is non-linear, it is defined by P-AXIS-00053 and P-AXIS-00081. |
Parameter | use_drive_curr_limit |
Data type | BOOLEAN |
Data range | 0: When FEEDHOLD is set, deceleration takes place using the currently valid deceleration rate. 1: When FEEDHOLD is set, deceleration takes place using the parameterised delay depending on the slope used. If these two parameters are not set, deceleration takes place at the currently valid deceleration rate (P-AXIS-00004). |
Dimension | ---- |
Default value | 0 |
Remarks |
|