Active delay with measurement signal (P-CHAN-00214)

P-CHAN-00214

Active delay with measurement signal

Description

In general, the effective feedhold deceleration is selected in all motion blocks by the channel parameter P-CHAN-00097 . The controller uses this deceleration to brake motion by default, even after the measurement signal is activated (e.g. measuring probe). Set the parameter to 1 if braking is required on activation of the measurement signal with rapid traverse deceleration.

Parameter

meas_deceleration_mode

Data type

UNS16

Data range

0: When the measurement signal is received, the motion is braked with feedhold deceleration (P-AXIS-00053 for non-linear slope) (default).

1: When the measurement signal is received, the motion is braked with rapid traverse deceleration (P-AXIS-00004 for non-linear slope).

Dimension

----

Default value

0

Remarks

Parameterisation example:

meas_deceleration_mode     1