ID 50924

Too many blocks within programmed #CONTOUR LOOKAHEAD area.

Description

NC program sequences can be marked with the command #CONTOUR LOOKAHEAD LOG ON/OFF so that the CNC can supply the HLI with motion blocks in the contour look-ahead area.
The maximum number of motion blocks in the area can be configured using P-CHAN-00658 (or P-STUP-00076). This error occurs if more motion blocks are programmed in the contour look-ahead area.

The contour look-ahead function must be activated by the parameter P-CHAN-00650 (or P-STUP-00070). (FCT_CONTOUR_LAH)

If the function is deactivated, this error is also output when the command is programmed.

Response

Class

2

Abort NC program processing.

Solution

Class

7

Increase P-CHAN-00658 (or P-STUP-00076) or reduce the contour look-ahead area and check P-CHAN-00650 (or P-STUP-00070)

Parameter

%1:

Block number [-]

Current motion block which exceeds the maximum number.

%2:

Upper limit value [-]

Maximum number of motion blocks in the contour look-ahead area (P-CHAN-00658 or P-STUP-00076)

Error type

1, Error message from NC program.