ID 21202

For a PLC-spindle this command is not available.

Description

NC commands were programmed in (spindle) axis-specific programming but this is not permitted with a so-called PLC spindle (P-CHAN-00069). Only the standard functions M3,M4,M5,M19, REV and POS may be used.

Response

Class

2

Abort NC program processing.

Solution

Class

3

Remove all commands from (spindle-) axis specific programming with exception of the listed above or deselect eventually corresponding predefined functions (P-CHAN-00039, P-CHAN-00025).

Parameter

%1:

Error value[-]

Number of the incorrect M-/H-/G-functions

Error type

1, Error message from NC program.