Name process data 'probe 2 actuated' (P-AXIS-00685)

P-AXIS-00685

Name process data 'probe 2 actuated'

Description

This parameter defines the cyclical process data in which the drive signals in a bit that probe 2 is actuated.

When one of the real-time status bits of the SERCOS status is used, this parameter must be set to 'S-0-0135' or 'S_0_135'; in all other cases it must be set to the name of the process data in the process data configuration.

If this parameter is used, enter the number of the bit used for transmission in P-AXIS-00686 .

Parameter

antr.sercos.probe_2_realtime_bits.probe_actuated.element_name

Data type

STRING

Data range

-

Axis types

T, R, S

Dimension

T: ----

R,S: ----

Default value

*

Drive types

SERCOS

Remarks

If the configured element name is not found in the process data configuration, the error message P-ERR-110610 and the axis parameters P-AXIS-00118 (measuring axis) and P-AXIS-00098 (kasto_axis) are reset to prevent the execution of a measurement travel or edge banding with incompletely configured probes.

* Note: The default value of variables is a blank string.