Synchronisation types MET_MOS, MEP_MOS

Synchronisation types without synchronisation with time or path-related pre-output. The associated pre-output values are set in P-CHAN-00070 (m_pre_outp[i]):

N10 G01 X10 G90 F5000

N20 X20

N30 X30

N40 X40

N50 M96 (M96 MEP_MOS m_pre_outp = 250000)

(or MET_MOS m_pre_outp = 300000µs)

N55 X80

N60 X0

M30

Synchronisation types MET_MOS, MEP_MOS
Synchronisation types MET_MOS, MEP_MOS

Notice

notice

MEP_MOS and MET_MOS require no acknowledgement; they must still be deleted in the PLC.

The same constraints apply to overlap programming as for synchronisation types MEP_SVS and MET_SVS.

Synchronisation types MOS, MOS_TS, MVS_SVS, MVS_SNS, MNS_SNS in combination with the 'microwebs' function:

Notice

notice

Use of this functionality requires licensing of the “CuttingPlus” extension pack. It is not included in the scope of the standard license.

In addition, a path.related pre-output can be specified for synchronisation types MOS, MOS_TS, MVS_SVS, MVS_SNS and MNS_SNS. This path can be defined in the channel parameter list or in the NC program.

In this case the the M function is output by the specified distance relative to the current block start. M functions brought forward are then treated as if they were programmed without any motion.

With synchronisation types MVS_SVS, MVS_SNS and MNS_SNS an acknowledgement is also expected at this point (MOS and MOS_TS require no acknowledgement but they must still be deleted in the PLC).

Programing Example

prg_example

N01 V.G.M_FCT[11].PRE_OUTP_PATH = 25 (* in [mm] *)

N02 V.G.M_FCT[11].SYNCH = 2 (* MVS_SVS *)

N10 G01 X10 G90 F5000

N20 X20

N30 X30

N40 X40

N50 M11 X80 (M11 as MVS_SVS m_pre_outp = 250000, X40 -25 = X15)

N60 X0

M30

The above example has the same effect as the following programming of M11 without pre-output:

N01 V.G.M_FCT[11].PRE_OUTP_PATH = 0 (* in [mm] *)

N02 V.G.M_FCT[11].SYNCH = 2 (* MVS_SVS *)

N10 G01 X10 G90 F5000

N20 X15

N20 M11 (M11 output as MVS_SVS)

N20 X20

N30 X30

N40 X40

N50 X80

N60 X0

M30

Pre-output and acknowledgement of an M function with microwebs
Pre-output and acknowledgement of an M function with microwebs

Release Note

release_note

This functionality is available as of Release V2.10.1507.05 and is enabled in the start-up list by P-STUP-00060 for each channel as follows:

configuration.channel[<i>].path_preparation.function FCT_DEFAULT | FCT_M_PRE_OUTPUT