Monitoring for negative software limit switch (P-AXIS-00521)

P-AXIS-00521

Activation of limit switch monitoring of the negative limit switch.

Description

Command position related software limit switch monitoring is executed during path preparation. This ensures that a programmed movement that crosses a software limit switch is not executed.

In certain situations the command position is influenced by circumstances that are not known in the path preparation process and can thus not be detected in the software limit switch operation of the path planning process. Examples for this are the use of the external command position interface of axis coupling via the HLI (see [HLI] or @@[FCT-A9]).

With both these parameters, a command side software limit switch monitoring can be activated. When monitoring is active it is checked in every interpolation cycle that the axis can stop from their current velocity before the software limit switch when it is decelerated with P-AXIS-00003.

The software limits used are the actual values of the software limit switches without considering the software limit switch tolerance (P-AXIS-00179).

If the software limit switch is crossed, error message P-ERR-70195 is output and the axis is stopped.

Parameter

lr_param.check_neg_command_limit

Data type

BOOLEAN

Data range

0/1

Axis types

T

Dimension

T: ----

 

Default value

0

Drive types

----

Remarks