Methods for measurement simulation (P-AXIS-00112)

P-AXIS-00112

Methods for measurement simulation

Description

This parameter defines the method for generation of measurement signal. The measurement signal point is the position when the measurement signal is output.

The value in P-AXIS-00145 must be specified depending on the measuring method selected.

With measuring method 1, the axis position is assigned to P-AXIS-00145 .

Parameter

meas_simu.meas_simu_mode

Data type

SGN32

Data range

1: Measurement signal is generated after reaching or crossing a predefined axis position. (interpretation mode: axis position *)

2: Measurement signal is generated after a defined number of CNC cycles. (interpretation mode: time *)

3: Measurement signal is set after reaching a relative position with respect to the measurement block. (interpretation mode: part distance *)

4: Measurement signal is generated if all axes have reached the target position. (interpretation mode: path position)

5: Measurement signal is generated if one of the axis has reached the target position. In contrast to mode 4 the signal is set immediately if any of the programmed measurement axes already is placed on the target position. (interpretation mode: path position)

Axis types

T, R, S

Dimension

T: ----

R,S: ----

Default value

1

Drive types

SERCOS

Remarks

* In addition, the parameter P-AXIS-00145 must be set for modes 1, 2, 3.