Position window for rapid movements (P-AXIS-00472)

P-AXIS-00472

Position window for rapid movements

Description

This parameter sets the position window for rapid traverse movements. This parameter becomes active with a value > 0. When the value is ≤ 0 (default) the parameter P-AXIS-00236 is used.

At the end of rapid traverse movements and at a programmed exact stop (G60) the position window set in this parameter is checked before the HLI signals StateLR_Data.X_InWindow, StateLR_Data.X_InPosition (see [HLI]) are generated or the movement is continued.

Parameter

getriebe[i].in_position_window_rapid

Data type

SGN32

Data range

0 … MAX(SGN32)

Axis types

T, R

Dimension

T: 0.1µm

R: 0.1µm

Default value

0

Drive types

----

Remarks

This parameter can not be used for spindles. Setting this parameter for spindles leads to a warning (see P-ERR-110560) and the value is set to 0.

Parameter P-AXIS-00395 has to be less than this parameter. If P-AXIS-00395 is bigger than P-AXIS-00472 the value of P-AXIS-00395 is corrected and a warning is output (see P-ERR-110561).