Deceleration at feedhold (P-AXIS-00053)
P-AXIS-00053 | Deceleration at feedhold (non-linear slope) | |
Description | With active Feedhold because of user reaction, measurement movement or homing, ramps are often chosen steeper than for rapid mode (G00) or workpiece machining (e.g. G01, G02, G03). The parameter defines the deceleration value for these cases. With missing entry the same deceleration like for G00 movement is used (P-AXIS-00005, P-AXIS-00006 or P-AXIS-00280, P-AXIS-00281). | |
Parameter | getriebe[i].slope_profil.a_feedh | |
Data type | UNS32 | |
Data range | 1 ≤ a_feedh ≤ P-AXIS-00008 | |
Axis types | T, R | |
Dimension | T: mm/s² | R: °/s² |
Default value | 0 | |
Drive types | ---- | |
Remarks | P-AXIS-00053 is only used if parameter P-CHAN-00097 in the channel parameter list is 1. When the parameter has the value 0, the value of P-AXIS-00004 (a_grenz) is used. | |