Deceleration at feedhold (P-AXIS-00024)

P-AXIS-00024

Deceleration for feedhold (linear slope)

Description

With active feedhold because of user reaction, measurement movement or homing, ramps are often chosen steeper than for rapid mode (G00) or workpiece machining (e.g. G01, G02, G03). The parameter defines the deceleration value for these cases.

With missing entry the minimum of the values of P-AXIS-00005 (a_grenz_stufe_1und P-AXIS-00006 (a_grenz_stufe_2) is used.

Parameter

getriebe[i].lslope_profil.a_feedh

Data type

UNS32

Data range

0 ≤ a_feedh ≤ P-AXIS-00008

Axis types

T, R

Dimension

T: mm/s²

R: °/s²

Default value

0

Drive types

----

Remarks

P-AXIS-00024 is only used if parameter P-CHAN-00097 in the channel parameter list is 1.

When the parameter has the value 0, then the minimum of the values of P-AXIS-00005 (a_grenz_stufe_1und P-AXIS-00006 (a_grenz_stufe_2) are used.