Reduced maximum speed with active G01 (P-AXIS-00214)

P-AXIS-00214

Reduced maximum speed with active G01

Description

The PLC uses the control signal REDUCED_SPEED to command the CNC to switch over to a reduced axis feed. The CNC reacts in real time. After an eventually necessary deceleration, none of the axes moves faster than the parameter entry. The active G01 deceleration value is used for the brake operation. If the deceleration value is changed in the NC program (#VECTOR LIMIT, G130, G131), it affects the deceleration operation.

This parameter defines the reduced axis speed, even if manual mode is active.

Parameter

getriebe[i].vb_max_red

Data type

UNS32

Data range

0 ≤ vb_max_red ≤ P-AXIS-00212

Axis types

T, R, S

Dimension

T: µm/s

R,S: 0.001°/s

Default value

0

Drive types

----

Remarks

 

 

Reduced maximum speed with active G01
Reduced maximum speed with active G01