Output variables
Cycle parameters | Description |
V.CYC.SysRetPosAx1 | The centre point of the tool touch probe in X. |
V.CYC.SysRetPosAx2 | The centre point of the tool touch probe in Y. |
V.CYC.SysRetPosAx3 | Surface position of the touch probe in Z. |
V.CYC.SysRetDiameter | The measuring plate diameter measured. |
See information on use of the output variables.
After completing calibration, the measurement results must also be entered in the configuration file SysCalibConfigToolSettingProbe.nc.