Conditional activation of the functionalities (P-CHAN-00655)
P-CHAN-00655 | Conditional enable of the functionalities |
Description | This parameter can be used to configure functions of the CNC that are activated in the channel depending on the program start mode.
Several settings can be predefined for activation as soon as an NC program is started in the machining mode listed under the condition P-CHAN-00656 . |
Parameter | configuration.interpolator.fct_enable[<idx>] where idx 0, 1 |
Data type | STRING |
Data range | |
Dimension | ---- |
Default value | FCT_IPO_DEFAULT |
Remarks | Parameter is available as of the following Builds: V2.11.2040.04 ; V2.11.2810.02 ; V3.1.3079.17 ; V3.1.3107.10 If no individual machining mode is set at the start of the program, this corresponds to the setting ISG_STANDARD. The default settings under index 0 ("fct_enable[0]") are used. For reasons of backward compatibility, P-CHAN-00655 "fct_enable[0]" corresponds to the previous parameter "function" P-CHAN-00650. Both notations or parameters can be used alternatively. |