Minimum path to activate fixed stop detection when measuring travel on fixed stop (P-AXIS-00776)

P-AXIS-00776

Minimum path to activate fixed stop detection when measuring travel to fixed stop

Description

This parameter defines how far to travel in the measuring block before fixed stop detection is activated. The value specified is a distance within the measuring block.

If the value is less than 0, the system checks whether the parameter P-AXIS-00771 has a value greater than or equal to zero and, if necessary, this is used; otherwise, the value zero is used for this parameter.

A value of zero activates fixed stop detection immediately at the start of the block.

If P-AXIS-00777 is parameterised at the same time, the smaller block motion path defined by the two parameters is used as the minimum path.

When measuring with several axes, the smallest block motion path of all axes involved in the measurement is used as the minimum path.

Parameter

kenngr.measure.fixed_stop_detect.start_distance

Data type

SGN32

Data range

MIN(SGN32) < P-AXIS-00776 < MAX(UNS32)

Axis types

<T, R>

Dimension

T: 0.1 µm

R: 10-4 °

Default value

0

Drive types

----

Remarks

Parameter available as of CNC Build V2.11.2810.01 and higher