Method to monitor the workspace with conveyor tracking (P-AXIS-00555)
P-AXIS-00555 | Select method to monitor the workspace when using the conveyor tracking functionality. | |
Description | This parameter influences the monitoring of the workspace when workpieces are machined on a linear conveyor. With machines that have the conveyor tracking functionality, the tool should remain as close as possible to the end position defined in P-CHAN-00374 in order to utilise the workspace to the full extent. In the event of a movement in the opposite conveying direction, the controller brakes the tool accordingly to prevent the position from being exceeded. When contour elements are fed through in the opposite conveying direction at a higher feed rate than the conveyor belt velocity, a check must be made whether the workspace is exited in the opposite conveyor belt direction. This requires a more complex check of the workspace and can be activated by this parameter. | |
Parameter | kenngr.conv_sync_optim | |
Data type | BOOLEAN | |
Data range | 0: Simplified method with low computing time requirement. It is only suitable when the conveyor velocity is significantly higher than the programmed feed rate. 1: The programmed contour is checked for collision. In this method, the tool travels to the required end position if possible. | |
Axis types | T | |
Dimension | T: ---- |
|
Default value | 0 | |
Drive types | ---- | |
Remarks | Available as of CNC Build V4.20.0 |