Parameterisation
Required input parameters
Input parameters | Description |
@P1 | Reference plane (absolute) |
@P2 | Retraction plane (absolute) |
@P3 | Safety clearance (relative to the reference plane, unsigned) |
@P4 | Final drilling depth (relative to the reference plane, unsigned) |
@P7 | Thread pitch (unsigned) |
@P30 | Clockwise direction (cw) or counter-clockwise (ccw) 0: clockwise (G02) 1: counter-clockwise (G03) |
@P68 | Nominal thread diameter |
Optional input parameters
Input parameters | Description |
@P17 | Dwell time at final drilling depth (in seconds) |
It is recommended using the Syntax check to verify whether the input parameters have been correctly assigned.