Parameterisation
Required input parameters
Input parameters | Description |
@P1 | Reference plane (absolute) |
@P2 | Retraction plane (absolute) |
@P3 | Safety clearance (relative to the reference plane, unsigned) |
@P4 | Final drilling depth (relative to the reference plane, unsigned) |
@P7 | Pitch |
@P24 | Spindle speed for thread tapping |
Optional input parameters
Input parameters | Description |
@P11 | Number of feeds |
@P17 | Dwell time at final drilling depth (in seconds) |
@P18 | Thread type: -1: left-hand thread 1: right-hand thread (default) |
@P31 | Machining mode: 0: thread tapping default (default) 1: thread tapping with chip breaking 2: thread tapping with chip evacuation |
@P61 | Return clearance for chip breaking and holding distance after chip evacuation (unsigned) (default: 0) |
@P62 | Angle for spindle positioning (default: 0) |
It is recommended to use the Syntax check to verify whether the input parameters are correctly assigned.