ID 70548

Permissible tolerance window exceeded during movement to fixed stop. Check the fixed stop.

Description

After detection of the fixed stop [FCT-M8], the fixed stop can be monitored against a tolerance window (see P-AXIS-00713). The CNC generates this error message if the fixed stop breaks off and exits the tolerance window.

 

Possible causes:

  • Fixed stop breaks off
  • Stop time too long

 

Possible solutions:

  • Check the mechanical components of the fixed stop
  • Reduce the torque

Response

Class

6

Controlled halt of the axis, the control loop is closed. Transition to error state. The Move to fixed stop function remains active.

Solution

Class

7

Check fixed stop, reduce torque

Parameter

%1:

Logical axis number [-]

Logical axis number P-AXIS-00016 of axis affected.

%2:

Error value [0.1 10^-3 mm or ø]

Current position of the fixed axis

%3:

Current value [0.1 10^-3 mm or ø]

Position at first detection of the fixed stop

%4:

Lower limit value [0.1 10^-3 mm or ø]

Lower limit for fixed stop position

%5:

Upper limit value [0.1 10^-3 mm or ø]

Upper limit for fixed stop position

Error type

11, Error message from position controller.