Configuration files

The SysCalibConfigLaser.nc file is executed before each cycle to calibrate the laser.

Variables

Description

V.CYC.LASER_POS_X

Position of the laser focal point in the X axis

V.CYC.LASER_POS_Y

Position of the laser focal point in the Y axis

V.CYC.LASER_POS_Z

Position of the laser focal point in the Z axis

V.CYC.DIRECTION

Definition of measuring and positioning direction:

  0-   Positioning takes place in X+ and measuring in X- direction

  1-   Positioning takes place in Y+ and measuring in Y- direction

  2-   Positioning takes place in X- measuring in X+ direction

  3-   Positioning takes place in Y- and measuring in Y+ direction

V.CYC.LASER_Z_START_POS

This position is approached before the first measurement in Z.

It should be a couple of mm above the laser focal point.

V.CYC.LASER_Z_END_POS

This position is approached for the first measurement

It should be a couple of mm under the laser focal point.

These 2 files control the activation and deactivation of the lasers:

  1. SysCalibConfigLaserOn.nc
  2. SysCalibConfigLaserOff.nc