ID 110098

Switching feed rate is 0.

Description

The changeover speed P-AXIS-00211 at the current limit between acceleration levels 1 and 2 of the linear slope (not jerk limited) was set to 0. The value must be bigger 0.

Response

Class

1

Initialization of acceleration with default value.

Solution

Class

1

Correction of the value in the parameter list

Parameter

%1:

Logical axis number [-]

P-AXIS-00016

%2:

Current value [1µm/s or 0,001°/s]

P-AXIS-00211

%3:

Corrected value [1µm/s or 0,001°/s]

P-AXIS-00211

Error type

2, Error message by data transfer from parameter list into control device.