Deceleration path greater than residual path.
|
Description
| With active function Edge bending, after activation of measurement signal via measuring probe, residual path P-CHAN-00030 defined in channel parameter list is reduced. The residual path available of current active channel block at this moment must be greater than P-CHAN-00030.
For more information on edge bending see [PROG// Section: Edge bending (G108)].
|
Response
| Class
| 4
| Movement stop.
|
Solution
| Class
| 0
| Either reduce the P-CHAN-00030 or increase the programmed residual path so that a distance to go of at least P-CHAN-00030 is available after responding to the measurement signal.
|
Parameter
| %1:
| Current value [0.1 µm or 0.0001°]
|
Residual path available in the programmed measuring block.
|
%2:
| Expected value [0.1 µm or 0.0001°]
|
Residual path depending on P-CHAN-00030 .
|
%3:
| Current value [0.1 µm or 0.0001°]
|
Path distance of measurement actual positions and target positions.
|
%4:
| Current value [0.1 µm or 0.0001°]
|
Channel block path.
|
Error type
| 1, Error message from NC program.
|
|