Measurement type (P-CHAN-00057)

P-CHAN-00057

Predefine measurement type

Description

Seven different measurement types are available. This element sets the required measurement type.

Parameter

messtyp

Data type

UNS16

Data range

1*: Measurement travel with at least one axis,

Measurement feed programmable by F word.

2*: Measurement travel with exactly one axis.

Measurement feed is specified in the axis data list.

3: Measurement travel with at least one axis,

Measurement feed programmable by F word,

optionally continue motion up to the target point.

4: Measurement travel only with the maximum of 3 main axes,

Measurement feed programmable by F word.

5: Interruptible measurement travel with at least one axis,

Measurement feed programmable by F word.

6: Interruptible measurement travel with at least one SERCOS axis,

Measurement feed programmable by F word.

7*: Measurement travel (G100) by moving to a fixed stop with at least one axis,

Measurement feed programmable by F word.

Dimension

----

Default value

1

Remarks

* for these measurement types a measurement travel is also possible with independent axes.

This measurement type can be changed at any time in the NC program with #MEAS MODE or #MEAS [TYPE..]. Further information is described in detail in [PROG].

Parameterisation example: Select measurement type 3 for a measurement travel with two axes and then continue motion up to the programmed target point.

Measurement type     3