ID 14461
The current position of the electrode exceeds the allowed deviation to the saved positions in the interruption point. | |||
Description | Before the start of the CNC cycle to retract the electrode, the electrode moved in relation to the stored positions. The distance of the current position exceeds the permitted distance specified in parameter @P1. | ||
Response | Class | - | Error: Transition to error state. Complete reset of the NC channel necessary. |
Solution | Class | - | Check whether the electrode can be moved with a linear motion to the stored positions. If this is the case, the cycles can be recalled with a larger permitted deviation. |
Error type | 1, Error message from the NC program | ||
|