Deceleration of step 2 (P-AXIS-00283)

P-AXIS-00283

Deceleration of step 2 (linear slope)

Description

The parameter is used during the deceleration phase. It defines the deceleration of step 2. When initialisation takes place with value 0, the value of P-AXIS-00012 is automatically used. It is limited to the maximum acceleration P-AXIS-00008 (a_max).

Parameter

getriebe[i].lslope_profil.d_stufe_2

Data type

UNS32

Data range

1 ≤ d_stufe_2 ≤ P-AXIS-00008

Axis types

T, R, S (version-specific)

Dimension

T: mm/s²

R,S: °/s²

Default value

0

Drive types

----

Remarks

The acceleration ramps can be changed in the NC program. The appropriate NC commands are described in detail in [PROG//G130, G131] in greater detail.

When the parameter has the value 0, it is assigned the value of P-AXIS-00012 (a_stufe_2).