Functional settings
Additional information
- Special settings for rotary axes
- Settings for homing
- Settings for software limit switch (SLS) monitoring
- Settings for measurement
- Activation of edge banding (P-AXIS-00098)
- Gantry mode
- Monitoring of axis collision
- Tracking mode
- Gear data
- Settings for SAI (Single Axis Interpolation)
- Velocity monitoring
- Behaviour when enabling the drive controller
- Tolerance window for IIR axis filter (P-AXIS-00351)
- Tolerance window for IIR axis filter after feedhold (P-AXIS-00780)
- Settings for velocity override
- Settings for feed rate influencing
- Reduced speed
- Torque configuration
- Gear couplings
- Interpolation of tracked axes in inserted TRC blocks (P-AXIS-00427)
- Axis specific dynamic monitoring during interpolation
- Suppress stop of spindle axis during channel reset (P-AXIS-00455)
- Enabling PLCopen interface of a channel axis (P-AXIS-00457)
- Collision monitoring during oscillation (P-AXIS-00485)
- Inversion of spindle rotation direction for spindle M-functions M3/M4 (P-AXIS-00490)
- Delay filter acts only on command positions (P-AXIS-00513)
- Enabling of IPO-LR interface after axis release (P-AXIS-00483)
- Setting of 'in position' for position controller generated axis movements (P-AXIS-00458)
- Settings for drive controllers
- Dynamic limits with tool gear (P-AXIS-00786)